Basic QOS policy for Huawei router
Monday, April 13, 2009Hi experts
I know sod-all about VOIP, so I'm hoping you can help, here. I have just had one Avaya IPOffice 406v2 system installed in our main office, and another in our branch office, which is at the end of a dedicated kilostream link. This link carries data between our networked workstations and servers at both sites (all are on a single domain and subnet). The link is serviced by 2 Huawei Quidway AR28-09 routers (one at each end) acting as a bridge.
I've allocated the 2 ipOffice boxes ip addresses within the network subnet, and they talk across the link just fine. However, I'm aware that I should be trying to control the voice traffic with a QOS policy, and I believe my routers will support it, but I don't know how to structure the policy, and therefore what commands to implement. I am currently talking to the routers via their CON port using hyperterminal, and the command set from the Huawei manuals which I managed to begborrowsteal for them.
I will upload the manual for the QOS command set for the routers to ee-stuff, and I can provide output from any commands, eg
[Display Current-configuration]
Now create configuration...
Current configuration
!
version 1.74
firewall enable
aaa-enable
aaa accounting-scheme optional
bridge enable
bridge 1 stp ieee
!
interface Aux0
async mode flow
link-protocol ppp
!
bridge-set 1
!
interface Serial0
clock DTECLK1
link-protocol ppp
bridge-set 1
!
return
[Display Interfaces]
Aux0 current state:up, line protocol current state:up (spoofing)
The Maximum Transmit Unit is 1500
physical layer is asynchronous, baudrate is 9600 bps
Link-protocol is PPP
LCP initial, IPCP initial, IPXCP initial, CCP initial, BRIDGECP initial
Input queue : (size/max/drops) 0/50/0
FIFO queueing: FIFO
(Outbound queue:Size/Length/Discards
FIFO: 0/75/0
Last 5 minutes input rate 0.00 bytes/sec, 0.00 packets/sec
Last 5 minutes output rate 0.00 bytes/sec, 0.00 packets/sec
Input: 0 packets, 0 bytes
0 broadcasts, 0 multicasts
0 errors, 0 runts, 0 giants
0 CRC,0 frame errors, 0 overrunners
0 aborted sequences 0 no buffers
0 packets with dribble condition detected
Output:1 packets, 27 bytes
0 broadcasts, 0 multicasts
0 errors, 0 underruns, 0 collisions
0 packets had been deferred
Ethernet0 current state:up, line protocol current state:up
Description: Ethernet interface, Ethernet0 Interface
The Maximum Transmit Unit is 1500
IP Sending Frames' Format is Ethernet_II,Hardware address is 00-e0-fc-2a-86-0a
Media type is twisted pair, loopback is not set, promiscuous mode set
Full-duplex mode, 100Mbps-speed mode, link type is autonegotiation
Input queue : (size/max/drops) 0/200/0
FIFO queueing: FIFO
(Outbound queue:Size/Length/Discards
FIFO: 0/75/0
Last 5 minutes input rate 1090.44 bytes/sec, 3.15 packets/sec
Last 5 minutes output rate 583.94 bytes/sec, 3.13 packets/sec
Input: 14822890 packets, 2188455972 bytes
515594 broadcasts, 14330 multicasts
0 errors, 0 runts, 0 giants
0 CRC,0 frame errors, 0 overrunners
0 aborted sequences 0 no buffers
0 packets with dribble condition detected
Output:14505838 packets, 2237588944 bytes
0 broadcasts, 0 multicasts
0 errors, 0 underruns, 0 collisions
0 packets had been deferred
Serial0 current state:up, line protocol current state:up
The Maximum Transmit Unit is 1500
physical layer is synchronous
interface is DTE, clock is DTECLK1, cable type is V35
Link-protocol is PPP
LCP opened, IPCP initial, IPXCP initial, CCP initial, BRIDGECP opened
Input queue : (size/max/drops) 0/50/0
FIFO queueing: FIFO
(Outbound queue:Size/Length/Discards
FIFO: 0/75/47
Last 5 minutes input rate 576.16 bytes/sec, 2.83 packets/sec
Last 5 minutes output rate 1131.27 bytes/sec, 3.85 packets/sec
Input: 13520295 packets, 2237239417 bytes
0 broadcasts, 0 multicasts
31 errors, 0 runts, 0 giants
17 CRC,7 frame errors, 7 overrunners
0 aborted sequences 0 no buffers
0 packets with dribble condition detected
Output:17122363 packets, 2349279100 bytes
0 broadcasts, 0 multicasts
0 errors, 0 underruns, 0 collisions
0 packets had been deferred
DCD=UP DTR=UP DSR=UP RTS=UP CTS=UP
