Learning All About Router

FBI_CIA#sh run

Building configuration...

Current configuration : 2661 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname FBI_CIA

!

boot-start-marker

boot-end-marker

!

enable secret 5 $1$7wh.$Swhg9iMImukpcSw.7sOK51

!

no aaa new-model

!

resource policy

!

mmi polling-interval 60

no mmi auto-configure

no mmi pvc

mmi snmp-timeout 180

voice-card 2

!

ip cef

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

!

class-map match-any GOLD

match access-group name ms-sql-traffic

class-map match-any VoipData

match access-group name VoipData

class-map match-any VoipControl

match access-group name VoipControl

!

!

policy-map PACKAGE2fordial

class GOLD

bandwidth percent 40

random-detect

set precedence 2

class class-default

fair-queue

random-detect

set precedence 0

policy-map PACKAGE2

class VoipData

set precedence 5

priority percent 25

class VoipControl

bandwidth percent 5

random-detect

set precedence 3

class GOLD

bandwidth percent 40

random-detect

set precedence 2

class class-default

fair-queue

random-detect

set precedence 0

policy-map Reset-VPN-Package2

class VoipData

set precedence 5

class VoipControl

set precedence 3

class GOLD

set precedence 2

!

!

!

!

interface Loopback0

description IP Loopback untuk Voice

ip address 192.XXX.XXX.31 255.255.255.255

!

interface FastEthernet0/0

ip address 192.168.215.1 255.255.255.128

speed auto

!

interface Serial1/0

ip address 172.xxx.xxx.126 255.255.255.252

!

ip route 0.0.0.0 0.0.0.0 172.17.150.125

!

no ip http server

no ip http secure-server

!

!

control-plane

!

!

!

voice-port 2/0

!

voice-port 2/1

!

!

!

!

!

!

dial-peer voice 75100 pots

destination-pattern 75100

port 2/0

!

dial-peer voice 75101 pots

destination-pattern 75101

port 2/1

!

dial-peer voice 293 voip

description Koneksi Voice Ke Padang

destination-pattern 293

session target ipv4:192.XXX.253.27

dtmf-relay cisco-rtp

ip qos dscp cs5 media

ip qos dscp cs3 signaling

no vad

!

dial-peer voice 765 voip

description Koneksi Voice ke Solok

destination-pattern 765

session target ipv4:192.XXX.253.30

dtmf-relay cisco-rtp

ip qos dscp cs5 media

ip qos dscp cs3 signaling

no vad

!

dial-peer voice 623 voip

description Koneksi Voice ke Bukittingi

destination-pattern 623

session target ipv4:192.XXX.253.22

dtmf-relay cisco-rtp

ip qos dscp cs5 media

ip qos dscp cs3 signaling

no vad

!

dial-peer voice 361 voip

description Koneksi voice ke Painan

destination-pattern 361

session target ipv4:192.XXX.XXX.18

dtmf-relay cisco-rtp

ip qos dscp cs5 media

ip qos dscp cs3 signaling

no vad

!

!

line con 0

password cilubak

login

line aux 0

line vty 0 4

password cilubak

login

!

end

FBI_CIA#

This section provides an example of the password recovery procedure. This example was created with a Cisco 2600 Series Router.
Even if you do not use a Cisco 2600 Series Router, this output provides an example of what you should experience on your product.

Router>enable
Password:
Password:
Password:
% Bad secrets

Router>show version
Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
Image text-base: 0×80008088, data-base: 0×80C524F8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 3 minutes
System returned to ROM by abort at PC 0×802D0B60
System image file is “flash:c2600-is-mz.120-7.T”

cisco 2611 (MPC860) processor (revision 0×202) with 26624K/6144K bytes of memory.
Processor board ID JAB031202NK (3878188963)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0×2102

Router>

!— The router was just powercycled, and during bootup a
!— break sequence was sent to the router.
!

*** System received an abort due to Break Key ***

signal= 0×3, code= 0×500, context= 0×813ac158
PC = 0×802d0b60, Vector = 0×500, SP = 0×80006030
rommon 1 > confreg 0×2142

You must reset or power cycle for new config to take effect

rommon 2 > reset

System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
TAC:Home:SW:IOS:Specials for info
C2600 platform with 32768 Kbytes of main memory
program load complete, entry point: 0×80008000, size: 0×6fdb4c

Self decompressing the image : ###############################
##############################################################
##############################################################
##############################################################
############################### [OK]
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
Image text-base: 0×80008088, data-base: 0×80C524F8

cisco 2611 (MPC860) processor (revision 0×202) with 26624K/6144K bytes of memory.
Processor board ID JAB031202NK (3878188963)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)
— System Configuration Dialog —

Would you like to enter the initial configuration dialog? [yes/no]: n

Press RETURN to get started!

00:00:19: %LINK-3-UPDOWN: Interface BRI0/0, changed state to up
00:00:19: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
00:00:19: %LINK-3-UPDOWN: Interface Ethernet0/1, changed state to up
00:00:19: %LINK-3-UPDOWN: Interface Serial0/0, changed state to down
00:00:19: %LINK-3-UPDOWN: Interface Serial0/1, changed state to down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0,
changed state to down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0,
changed state to up
Router>
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1,
changed state to up
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0,
changed state to down
00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1,
changed state to down
00:00:50: %SYS-5-RESTART: System restarted –
Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
00:00:50: %LINK-5-CHANGED: Interface BRI0/0,
changed state to administratively down
00:00:52: %LINK-5-CHANGED: Interface Ethernet0/0,
changed state to administratively down
00:00:52: %LINK-5-CHANGED: Interface Serial0/0,
changed state to administratively down
00:00:52: %LINK-5-CHANGED: Interface Ethernet0/1,
changed state to administratively down
00:00:52: %LINK-5-CHANGED: Interface Serial0/1,
changed state to administratively down
00:00:53: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0,
changed state to down
00:00:53: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/1,
changed state to down
Router>
Router>enable
Router#copy startup-config running-config
Destination filename [running-config]?
1324 bytes copied in 2.35 secs (662 bytes/sec)
Router#
00:01:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1,
changed state to down
00:01:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:2,
changed state to down
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#enable secret <>
Router(config)#^Z
00:01:54: %SYS-5-CONFIG_I: Configured from console by console
Router#show ip interface brief

Interface IP-Address OK? Method Status Protocol
Ethernet0/0 10.200.40.37 YES TFTP administratively down down
Serial0/0 unassigned YES TFTP administratively down down
BRI0/0 193.251.121.157 YES unset administratively down down
BRI0/0:1 unassigned YES unset administratively down down
BRI0/0:2 unassigned YES unset administratively down down
Ethernet0/1 unassigned YES TFTP administratively down down
Serial0/1 unassigned YES TFTP administratively down down
Loopback0 193.251.121.157 YES TFTP up up
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface Ethernet0/0
Router(config-if)#no shutdown
Router(config-if)#
00:02:14: %LINK-3-UPDOWN: Interface Ethernet0/0, changed state to up
00:02:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0,
changed state to up
Router(config-if)#interface BRI0/0
Router(config-if)#no shutdown
Router(config-if)#
00:02:26: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down
00:02:26: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to down
00:02:26: %LINK-3-UPDOWN: Interface BRI0/0, changed state to up
00:02:115964116991: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0,
TEI 68 changed to up
Router(config-if)#^Z
Router#
00:02:35: %SYS-5-CONFIG_I: Configured from console by console
Router#copy running-config startup-config
Destination filename [startup-config]?
Building configuration…
[OK]
Router#show version
Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
Image text-base: 0×80008088, data-base: 0×80C524F8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 3 minutes
System returned to ROM by abort at PC 0×802D0B60
System image file is “flash:c2600-is-mz.120-7.T”

cisco 2611 (MPC860) processor (revision 0×202)
with 26624K/6144K bytes of memory.
Processor board ID JAB031202NK (3878188963)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0×2142

Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#config-register 0×2102
Router(config)#^Z
00:03:20: %SYS-5-CONFIG_I: Configured from console by console

Router#show version
Cisco Internetwork Operating System Software
IOS ™ C2600 Software (C2600-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Tue 07-Dec-99 02:21 by phanguye
Image text-base: 0×80008088, data-base: 0×80C524F8

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

Router uptime is 3 minutes
System returned to ROM by abort at PC 0×802D0B60
System image file is “flash:c2600-is-mz.120-7.T”

cisco 2611 (MPC860) processor (revision 0×202)
with 26624K/6144K bytes of memory.
Processor board ID JAB031202NK (3878188963)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.

2 Ethernet/IEEE 802.3 interface(s)
2 Serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash partition 1 (Read/Write)
8192K bytes of processor board System flash partition 2 (Read/Write)

Configuration register is 0×2142 (will be 0×2102 at next reload)

Router#